BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car



BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
- 9. Coupling
   9.2. Specifications
   9.3. Coupling check
   9.4. Main cylinder of coupling
   9.5. Coupling pedal
   9.6. The blocking coupling switch
   9.7. Working cylinder of coupling
   9.8. Removal of air from a coupling hydraulic actuator
   9.9. Coupling details
   9.10. Driveshaft
   9.11. Elastic coupling
   9.12. Average support
   9.13. Cardan hinges
   9.14. The forward aligning plug
   9.15. Driveshaft CV JOINT
   9.16. Half shafts
   9.17. CV JOINTS and covers
   9.18. Epiploons of a reducer of a back axis
   9.19. Reducer of a back axis
   9.20. Epiploon of the leading gear wheel of a reducer
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips


4ca876a9



9.5. Coupling pedal

GENERAL INFORMATION

Coupling pedal rod lock-nut

For adjustment displace a cover, release a lock-nut (1) and rotate a rod for lysk (2).

Check and adjustment


Prevention

Adjustment of a pedal is required only when replacing the main cylinder.


PERFORMANCE ORDER
1. Check distance And from a pedal edge to a partition.
2. For adjustment release a nut and a bolt of a pusher. The clown providing movement of a pedal at rotation of a bolt has a bolt. After adjustment of a pedal tighten a nut. If the tag is applied on a bolt of a pedal, then it has to be located on one straight line with the cylinder and is turned from the cylinder.
3. On a part of cars additional adjustment which is provided with rotation of a rod of the main cylinder at the released lock-nut is provided.
Prevention

It is not allowed to wrap a pusher to a limit. After adjustment be convinced that between a lock-nut and a pedal there is a gap. Otherwise the pusher will be bent.

Do not draw a pusher lock-nut in order to avoid failure of a carving.