BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car

BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. Running gear
   11.1.10. Back springs
   11.1.11. Bar of the back stabilizer of cross stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Angles of installation of wheels
   11.1.2. Specifications
   11.1.3. Stabilizer of cross stability of a forward suspension bracket
   11.1.4. Suspension bracket lever
   11.1.5. Rack of a forward suspension bracket
   11.1.6. Springs or shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. Nave of a forward wheel and bearing
   11.1.9. Back shock-absorbers
   + 11.2. Steering
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips

11.1.11. Bar of the back stabilizer of cross stability

Removal and installation

PERFORMANCE ORDER

1. Block forward wheels. Lift a back part of the car and establish on supports.
	2. Turn off nuts and bolts of an arm of a bar of the back stabilizer.
	3. Disconnect a stabilizer bar from racks on both sides and remove.
4. Check a condition of bolts, washers, plugs and racks. Replace the worn-out and damaged details.
5. Installation is carried out upside-down. Delay all fastenings with the set moments.