BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car

BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. Running gear
   11.1.10. Back springs
   11.1.11. Bar of the back stabilizer of cross stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Angles of installation of wheels
   11.1.2. Specifications
   11.1.3. Stabilizer of cross stability of a forward suspension bracket
   11.1.4. Suspension bracket lever
   11.1.5. Rack of a forward suspension bracket
   11.1.6. Springs or shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. Nave of a forward wheel and bearing
   11.1.9. Back shock-absorbers
   - 11.2. Steering
      11.2.2. Tips of helmsmen ятг
      11.2.3. Covers of the steering mechanism
      11.2.4. Steering mechanism
      11.2.5. Pump of the hydraulic booster
      11.2.6. Removal of air from the power steering
      11.2.7. Steering wheel
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips

11.2.5. Pump of the hydraulic booster

Removal and installation

PERFORMANCE ORDER

1. Lift the car and remove the lower guard of the engine.
2. Disconnect the return hose of the hydraulic booster from a tank and merge liquid, disconnect a pressure head hose from the pump.
3. If it is necessary to remove a pulley from the pump, then squeeze a belt of the drive and turn off pulley bolts.
4. Release a bolt of a natyazhitel of a belt, weaken a belt and remove.

5. Turn off bolts of fastening and remove the pump.
6. Installation is carried out upside-down. Upon termination of adjust a belt tension.
7. Fill in liquid and remove air from the highway of the power steering.