| 1. Disconnect the battery from weight. |
| 2. Hook and remove a company brand in the center of a wheel. |
|
|
3. Turn off a nut and designate a tag the provision of a wheel on a shaft. |
| 4. Transfer the ignition key to the 1st situation to unlock the wheel shaft lock. |
| 5. Remove a wheel, if necessary use a stripper, it is forbidden to remove a wheel blows of the hammer. |
| 6. Installation is carried out upside-down. At assembly combine tags on a wheel and to a shaft and tighten a nut with the set moment. |
