BMW 3 Series E30

since 1983-1994 release

Repair and operation of the car



BMW E30
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   - 3.1.2. Specifications
      3.1.3. Types of the repair work performed without dismantle of the engine
      3.1.4. Order of installation of the piston of the 1st cylinder in compression step VMT
      3.1.5. Cover of a head of cylinders
      3.1.6. The soaking-up collector
      3.1.7. Final collector
      3.1.8. Cam-shaft drive chain covers (M10 engine)
      3.1.9. Chain and asterisks (M10 engine)
      3.1.10. Covers of a gear belt (M20 and M40 engines)
      3.1.11. Gear belt and asterisks of a cam-shaft (M20 and M40 engines)
      3.1.12. Forward epiploons
      3.1.13. Head of cylinders
      3.1.14. Pallet
      3.1.15. Oil pump
      3.1.16. Flywheel (drive plate)
      3.1.17. Back epiploon of the crankshaft
      3.1.18. Engine mount details
   + 3.2. Dismantle and capital repairs of the engine
   + 3.3. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Useful tips


4ca876a9



3.1.18. Engine mount details

Check and replacement

PERFORMANCE ORDER
1. You will hang out the engine to unload support.
2. Check existence on support of cracks and peelings of rubber from a metal basis.
3. Check an inhaling of bolts of fastening of support, having shaken support the lever. If necessary lower the engine and tighten.
4. On the M40 engine check a condition of dampers for what disconnect them and check resistance to compression and stretching.
5. To remove a damper turn off a bolt. To remove a support, disconnect the battery from weight, lift the car, turn off a nut (it is specified by an arrow), raise the engine, turn off bolts of the lower arm and get a support. At assembly grease threaded connections with the fixing structure.